Smart Tails Professional Medium Blade Tail Thinner for Horses

These Revolutionary Horse Mane And Tail Thinners Or Rakes Are One Of The Only Products On The Market That Actually Thin Thick Manes And Tails, And Give The Pulled Look Without Discomfort. A Full Tail Can Be Transformed To A Pulled Tail Ready For The Show Ring In Minutes. The Professional Range (Wooden Handles) Has A Replaceable Blade System With A Nut And Screw On The Side Of The Head To Allow The Blade To Be Replaced When Blunt, Or Interchanged With Another Grade Of Blade If Required. With Four Blades Available The Professional (Wooden Handled) Range Of Smart Tails Are An Essential Part Of Any Grooming Kit. Which Blade To Choose: Coarse Blades Are Good For Thick Full Tails, Manes And Thick Coats, Which Haven’T Been Tidied Before Or Are Very Coarse. This Will Process A Large Amount Of Thick Hair Easily And Efficiently Leaving A Tidy Looking Finish. The Coarse Blade Is Also Very Good On Natives That Are Being Shown, Where The End Result Needs To Look Tidy But Still Untouched. 8 Teeth Medium Blades Are Good For The Average Type Of Mane, Tail Or Coat. This Will Cope With Medium To Soft Hair And Is Ideal On Manes And Tails. 12 Teeth Fine Blades Are Mostly Used On Hair Which Has Already Been Tidied Or Is Quite Fine. It Is Also Useful To Finish Really Thick Tails When A Close Finish Is Needed, And The Bulk Of It Has Already Been Shaped With A Coarser Blade. 20 Teeth Superfine Blades Are Used Mostly For Finishing Small Show Ponies Or Animals With Small Docks And Very Fine Hair, As It Will Get Close To The Top Hairs. The Superfine Blades Can Also Used On All Types Of Hair Where Final Presentation Is Critical As It Will Pick Up The Top Fine Hairs Which Are Sometimes More Difficult To Reach With The Other Blades. 20 Teeth Guaranteed To Work On The Most Sensitive Of Animals. Made From High Quality Scandinavian Steel And Manufactured In Germany.